Hit the target

DeltaRed · Mar 3, 2021

Backed into the disc hitch this afternoon. Hit the whole perfect first time. The hitch pin just fell in. Clank!

SVcummins · Mar 3, 2021

Always good but my 370 has a pivoting clevis on it .

DeltaRed · Mar 3, 2021

Well it used to Pivot,but I welded it solid.I hate pivoting clevis's. They are a PIA to hook up.

SVcummins · Mar 3, 2021

They are that but they sure follow the ground better and no bent draw pins .

fastfarmall · Mar 3, 2021

Tighten the cross bolt !! Might have to put in a new bolt!!

SVcummins · Mar 3, 2021

I like it the way it is I just back up to the right spot swing the drawbar and drop the pin in the hole pull ahead and lock the drawbar solid and head to disc

onefarmer · Mar 4, 2021

Texasmark1 · Mar 4, 2021

I put a flat washer under my pin of that type.

David from Kansas · Mar 4, 2021

Rarely that good (or lucky) you'd think I could do better after about 70 years practice. My depth perception sucks.

onefarmer · Mar 4, 2021

When the wire handle gets lost I weld a T-handle to mine. Depending on what it's used on I weld a washer to it too. Most of my hitches wouldn't need it.

fixerupper · Mar 4, 2021

Those floppy clevis hitches were designed by people who have never had to hook up the implement with no one back there to hold the hitch up.

Hit the target

DeltaRed

Well-known Member

SVcummins

Well-known Member

DeltaRed

Well-known Member

SVcummins

Well-known Member

fastfarmall

Well-known Member

SVcummins

Well-known Member

onefarmer

Well-known Member

Texasmark1

Well-known Member

David from Kansas

Well-known Member

onefarmer

Well-known Member

fixerupper

Well-known Member

Similar threads