Fuel Leak On The Massey

rusty6

Well-known Member
I think I mentioned just over a week ago about the diesel injection pump leak on the Super 90 during the extreme cold. Well it warmed up to just above freezing
today and the new gasket arrived yesterday so I started on the job today. I've got it together but didn't have time to start the bleeding process and start it up.
Showed some of the details in this video.


cvphoto79331.jpg

CAV Gasket
 
I hate bleeding my 65s. The 3020 and 4020 will bleed with a few spins of the starter. The MF 65s require hand pumping and usually cracking an injector line. Good luck.
 
(quoted from post at 07:02:45 02/23/21) I hate bleeding my 65s. The 3020 and 4020 will bleed with a few spins of the starter. The MF 65s require hand pumping and usually cracking an injector line. Good luck.
Thanks, I might do a video on the bleeding process depending on how cold or difficult it is. Usually when things get stressful I turn the camera off. Its been a few years since I had to bleed the fuel system on this one and I'll need to consult the manual.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top