Loader

Bruce SEKs · Feb 3, 2021

Has anyone had the quick attach pads bend on a Case Loader?

Bruce SEKs · Feb 3, 2021

can't get pics to load

Bruce SEKs · Feb 3, 2021

mtf · Feb 3, 2021

My dad had a woods loader that would do that from time to time. Take a block of wood and put it between the frame and the pad on the left side. Retract the tilt cylinders just enough to straighten the two pads.

The problem is that the tube connecting the two pads twists.

Bruce SEKs · Feb 3, 2021

Thanks

matthies · Feb 3, 2021

Looks pretty thin for the abuse it would take, any idea who made the brackets?

rick n ohio · Feb 4, 2021

I bent mine once on my kubota while using my grapple somehow the brush caught the quick connect unleashing it I had to cut the pipe into that connects the two together then reweld it after hooking it back up

showcrop · Feb 4, 2021

i looked at one on a Kubota that a fellow asked me about. He was having a lot of trouble to attach the tools. He had bent it when one side had not latched securely.

495man · Feb 4, 2021

Had something similar happen on an NH loader, one pin didn't lock properly and twisted the tube between the sides. You might be able to untwist it, worse case cut the tube and reweld.

One reason I like Euro, both pins are in at same time and stronger connection.

Loader

Bruce SEKs

Member

Bruce SEKs

Member

Bruce SEKs

Member

mtf

Member

Bruce SEKs

Member

matthies

Well-known Member

rick n ohio

Member

showcrop

Well-known Member

495man

Well-known Member

Similar threads