SV implement company

SVcummins

Well-known Member
Got the decals ordered for the delivery truck 24 inch wide 18? Inches tall
cvphoto73070.png


cvphoto73071.jpg
 
There ya go...

next thing we will know he will be taking the truck to the local paint booth/ body shop..

Any of you on here know of a good upholstery shop? he is going to need to get the seat fixed... ringo is tired of sitting/sleeping on the springs... old feed sacks just wont do..
 
The local shop can reupholster the seat but 500$ . Thats not in the budget right now need to spend that on heads and rings
 
I have enough classic John Deere green to paint it if I could get grandpa to hop on a jet and bring his paint brush ?
 
It runs fine but it uses oil the 15 50 has definitely slowed the oil use down . Ringo won’t ride in here anyway he hates old gas powered vehicles.
 

I see you know what to do with the green ones. Just raise the bed and dump them off.
 
Using a level and a square off the crease in the door it should be pretty easy with a couple of pencil marks for a guide. Keeping the bubbles out while putting them on will be harder to do.
 
No way I'd put something like that on a truck,around my area DOT will pretty much let farmers go with about anything a sign that would make them think you are some sort of a dealer would make you a target to be checked.
 

Yep. Then they would want you to have commercial tags and all the other regulatory crud. But where SV is at, he can probably drive a hundred miles and not see the local gestap. And he probably knows them anyway.
 
(quoted from post at 20:56:58 01/27/21) Hopefully I can get them on straight

Wet the door down with water with a drop of dish detergent in it, or use straight Windex.

Then you can apply the decal, move it around, get it straight, then squeegee the liquid out.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top