Allis Chalmers B

Hello

Over a year ago I seen pics on Yesterdays Tractors of an Allis Chalmers B pulling a plow, was a 3 point or Snap Coupler plow. Been unable to find them again, wanted to see if I could see the pictures again. For reference only. Thank you for your time.
 
I've never seen one and this is the first time I have ever heard of one but still very likely to be a mounted one since the B was not offered for long after 55
 
Could be one of four things. Standard mounted AC plow, aftermarket 3 pt hitch and plow, somewhat rare snap coupler from AC that they had at the end, or the Australian aftermarket Mitchell Snap Hitch. https://collections.museumsvictoria.com.au/items/1504564
AaronSEIA
 
snap coupler was never a factory option on a B but could be installed aftermarket by the dealer. Factory drawbar was turned to the front with a bracket that came with the kit. An eye bolt held the front of the drawbar,which held a bracket toconnect the snap coupler bell which was the bell for a CA. The rock shaft was replaced by one fromthe kit and the B hydraulic clynder was replaced by a CC cylinder.I have had oneand seen severalothers
 
Could the tractor been a CA, they came with snap coupler and look like a B or C especially to those who aren't real familiar with ACs.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top