(800) 853-2651
SHOP NOW

Value on wheels and tires?

R

Rick Kr

Well-known Member
I finally have my Ford/NH3930 switched over to my R-4s.

I have the 9.5-24s and 14.9-28s with wheels to sell, but have
no idea where to start on price.

They are worn, but usable. One 14.9 was vulcanized since
I’ve owned the tractor for 17 years.

Thanks.
 

cvphoto59898.jpg


cvphoto59899.jpg
 
I just picked up 2- 14.9x28’s Goodyear that are worn, but not cracked or tore. They came off a FWA. $200. There are some 16.9x28 on rim, no centers, checked and weathered on CL. $460.
 
For me the tire in the first picture has zero value. Maybe you can find someone who can use the other tire and rims. Get $200 and put some/most in the collection plate on Sunday as you were very fortunate in my mind.
 

I dunno what the life span of a vulcanized tire should be I have one that was repaired just like that 40 years ago the tire should have been thrown away then it was rotten and well worn...

Some poor boy could use it, its not worthless...
 
Is that bolt circle 8 on 8"?
What size are the lug/studs on the tractor?
I would really like to put 14.9-28s on one of my tractors but need them 8 on 8" and for 3/4" studs. I need the complete package - rims, centers, tires, tubes.
 
(quoted from post at 04:32:04 10/20/20) Is that bolt circle 8 on 8"?
What size are the lug/studs on the tractor?
I would really like to put 14.9-28s on one of my tractors but need them 8 on 8" and for 3/4" studs. I need the complete package - rims, centers, tires, tubes.
Click to expand...

3930 will have the same 8x8 bolt pattern as the 3 cylinder 4000.

I sold a set of tires and wheels with centers from a 3930 back in the spring.
14.9-28's 9 years old with one having a 3" cut between the lugs from a broken glass bottle, cut was to the cords but not thru, they still had 80% thread, one rim was bent in at the bead but could be straighten with the tire off.
Sold them local for $700
 
Ultradog,
These are 8 on 8 with 3/4" studs (1 1/2" lugs). A lot of the mid size Fords and New Hollands use these.
Im in mid-Michigan.


Rick
 
You must log in or register to reply here.

Similar threads

P
Advice on what Ford to buy (8N, Jubilee, 600, and 641)
Replies
11
Views
1K
pard
P
K
Fordson fenders and wheels
Replies
7
Views
3K
Kbroersma
K
T
MF 65 ... Where to Start?
2
Replies
25
Views
6K
texski
T
F
Need info and opinions on Ford 1520 dual clutch replacem
Replies
3
Views
1K
jimtrs
J
I
auction results
Replies
6
Views
1K
RESLLS
R
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top