alternative engine

Drak · Oct 10, 2020

HIALL, I have a AC WC with engine issues and was considering to buy a secondhand engine for it, what would be the best up-grade engine to look for ??that would fit, my wc is 1935 unsettled, your help would be much appreciated in this matter.
John

johnlobb · Oct 10, 2020

Maybe if you post this in the Allis Chalmers section, you might have better luck with answers?

DeltaSteve · Oct 10, 2020

Not an AC guy,but I think a WD or WD45 engine would be your best bet,especially if you want to be close to 'factory'. However,if you want something more 'exotic',like a V8;diesel;inline 6,or..... Your immagination is the only limiting factor.

504 · Oct 10, 2020

I may be wrong, but I think a D-17 will drop in.

steve_in_mo · Oct 10, 2020

WD, WD45, D-17, 170, Gleaner model E combine.
You may need to swap some mounting parts and maybe the governor.

Jerry Coulter · Oct 10, 2020

One time I found a LeRoi 50HP engine, about 226cid I believe and it bolted right into a WC. I used it on a Gehl mix-mill and ate up the transmission gear that drove the PTO. So, if you up the power in your WC, be careful how you use it.

derwen1959 · Oct 10, 2020

Why not fix up original engine?

caterpillar guy · Oct 11, 2020

I've got an engine out of an F Gleaner if you're interested. No it is not a Government Motors engine either.

fastfarmall · Oct 11, 2020

The E Gleaner will fit, you have to cut a small notch out of the frame rail,maybe a 1/4 deep,X a inch long, to make room for a housing, on the right front corner of the WC, other than that it fits nice !!!

alternative engine

Drak

Member

johnlobb

Well-known Member

DeltaSteve

Member

504

Well-known Member

steve_in_mo

Well-known Member

Jerry Coulter

Member

derwen1959

Member

caterpillar guy

Well-known Member

fastfarmall

Well-known Member

Similar threads