grandpa Love
Well-known Member
Friend bought this. Was told it fit a ford 5000. It does not. Any ideas? Return shipping ain't worth it. Cost more than the part.
- Thread starter grandpa Love
- Start date
OP
OP
grandpa Love
Well-known Member
Bolt holes are 3 1/2 by 4 1/2 inches
shaun wallace
Well-known Member
The blue part fits 42/5200 . Valve milled on bottom for orings?
Adirondack case guy
Well-known Member
I didn't know you had a Ford as modern as a 5000. They were the best all-round general purpose tractor that Ford ever offered.-------Loren
OP
OP
grandpa Love
Well-known Member
Loren, wish it was mine.. .... It's a friend of mine.
OP
OP
grandpa Love
Well-known Member
Yes. Milled with o rings
Ultradog MN
Well-known Member
- Location
- Twin Cities
Shuan Wallace is correct.
Single remote valve and linkage off the 4000/5000 row crops. They used a manifold to move the valve up and to the rear of the normal location so it would fit in the fancy console on those.
The valve was the same as used on other Fords but modified to fit the RCs.
Definately worth listing on ebay as all of that RC stuff is made of unobtanium now.
Single remote valve and linkage off the 4000/5000 row crops. They used a manifold to move the valve up and to the rear of the normal location so it would fit in the fancy console on those.
The valve was the same as used on other Fords but modified to fit the RCs.
Definately worth listing on ebay as all of that RC stuff is made of unobtanium now.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy