Another one followed me home

Adrian Billheimer

Well-known Member
I must be a magnet, '45 BN homemade loader, but looks good and runs nice, needs a little work, nuthin I can't handle.
cvphoto57126.jpg
 
do some of those hoses power an after market power steering? Would be a hard steer with that bucket loaded and manual steering.
 
Hard steering will probably aid in preventing you from overloading the bucket & fracturing that fragile torque tube. My Super C with a Wagner loader has a large bridge iron (6" angle) that ties the cultivator mounting point on the front bolster to the rear axle running on each side of the torque tube to provide added strength to that weak point.
 
Looks a lot like mine on the B only i ran 1/2x4 all the way to the bosses under the takn next to the battery have had it many yrs pull 4 pins and it is off runs with Charr -Lynn power pac off the pto. Rebuild the front steering gear and run 90wt lube steers pretty well handy with blade for pushing snow
 
cute little guy! does the torque tube date codes match the rest of the tractor's #s? the loader just looks so overpowering compared to the tube.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top