Dura-a-Scamp

dscoiho · Jul 27, 2020

I saw on this forum that someone had a Dura-a-scamp. I just purchased an identical one need to see if anyone has pictures of the battery compartment with batteries connected and control compartment next to it.
I have the control module but there is couple maybe solenoids missing not sure.

shinnery · Jul 28, 2020

What is a Dura-a-Scamp? Never heard of one.

showcrop · Jul 28, 2020

Decoiho, a picture of it would help. Hr to ID anything from it's battery box, LOL.

dscoiho · Jul 28, 2020

Here is the overall unit.

Determined · Jul 28, 2020

Looking at your pictures I would say you are missing more than a few contactors, fuses, relays etc.

You said you have the controller, do you mean the operator panel for the bucket or the drive motor controller?

For the drive motor controller I am guessing it is probably a GE EV-1, if so a good starting point would be the Taylor Dunn site you can look up the service manual for an E-451 tow tractor and you will have a wiring diagram showing how the controller connects.

As far as the rest of the electrical goes it should be similar to what you will find on a scissor lift, lots of resources online for those.

dscoiho · Jul 28, 2020

Determined thanks for that information. I uploaded the pictures of the Kelly Controller that came with unit which I am sure is the motor controller.
I also have the original schematics for the wiring, but that is not exactly my expertise. It takes 8 6 volt batteries. Since saw a post back in 2007 wasn't sure if anyone still had one that is operational that could shed some light on everything connects and what I may be missing.

Dura-a-Scamp

dscoiho

New User

shinnery

Well-known Member

showcrop

Well-known Member

dscoiho

New User

Determined

Well-known Member

dscoiho

New User

Similar threads