REBUILD A BUDA4 engine from a cockshutt 3o

hlord1@hotmail.com · May 12, 2020

I need advice on how to unbolt the engine of a cockshutt 30 its a buda 4. It appears to have 4 bolts but the heads of 2 are inaccessible. Any help

Mike(NEOhio) · May 12, 2020

The front mount bolts go through the frame with nuts on the bottom end, they also hold up the dust shield. It may have shims under the mounts, don't lose or mix them up. Take off the starter and clutch housing, the rear mount are under it along with two alignment dowels. Pry them out first.

hlord1@hotmail.com · May 12, 2020

thanks for the information

Mike(NEOhio) · May 12, 2020

I recently rebuilt the six in my E4. Post any further questions on the Oliver and Cockshutt forum. Lots of help there and Phil Heisey usually responds to parts needs.

REBUILD A BUDA4 engine from a cockshutt 3o

[email protected]

New User

Mike(NEOhio)

Well-known Member

[email protected]

New User

Mike(NEOhio)

Well-known Member

Similar threads