(800) 853-2651
SHOP NOW

Allis Chalmers D17 Leak - does a plug go here?

S

saubz

New User
Hello,

Got an AC D17 Series 3. I m looking down under the "passenger" side where the traction booster adjustment block is and I see oil leaking. I ve attached pictures for reference (the second one isn t mine it s just for illustration). Is there supposed to be a plug in this hole? What size if so? Thank you!

mvphoto50451.jpg


mvphoto50452.jpg
 
Hello saubz, welcome to YT! It seems as though no Allis gurus are lurking about here on Tractor Talk. Maybe
you could get a response by posting on the Allis board. See my link. Sorry, I?m a Farmall guy.
Poke here
 

Thanks for the suggestion. I did get an answer over there but can t seem to post a link.
 
I would post this on the Allis board, there is a guy goes by the name Dr. Allis who was a mechanic for Allis Chalmers he most
likely can answer your question.
 
Not an Allis person. It does look like there is a plug in there already. It does look like it is leaking at the threads there. I would drain, with plug removed use a magnet, to try to get any shavings in the threads out. Then put plug back in. I have gotten so I check all plug holes where I drain oil out of on transmission or plugs that could get things in the threads. It has fixed a lot of leaking plugs for me on things like that.
 
You must log in or register to reply here.

Similar threads

I
Allis Chalmers 45 grader - more machinery archeology
Replies
5
Views
2K
Ian Beale
I
O
Magneto timing and firing order for a 1945 VE4 Wisconsin
Replies
1
Views
4K
greygoat
G
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top