jon f mn
Well-known Member
Got the baler needles back from SV a while back. He was able to get a new one now and the ones I did weren't quite right.
The one sticking up is the new one. Since I didn't have a good one to go by I had to guess at the arch and I was off some. So he sent them back for me to rework. Some heat and a little hammering with a 2 pound plastic hammer and they look better now.
They are not perfect but they should be close enough to work.
The one sticking up is the new one. Since I didn't have a good one to go by I had to guess at the arch and I was off some. So he sent them back for me to rework. Some heat and a little hammering with a 2 pound plastic hammer and they look better now.
They are not perfect but they should be close enough to work.