1950 model A powr- trol plug

Zmurray10 · Nov 20, 2019

I have a 1950 model A with power trol When I engage the pto the bottom dummy plug pops out and oil rushes out like its build to much pressure. The plug doesn't look worn, it has a hole in the side and in the end. Can some one tell me what the problem is

matthies · Nov 20, 2019

Is the lever on the left side of the seat in the center position?

Mike(NEOhio) · Nov 20, 2019

Could be the locking pin is worn or broken.

PJH · Nov 20, 2019

The PowerTrol lever should center itself in that situation, but in addition to the locking lever and pins, there are two O-rings in each of the plug cavities that will allow the plugs to pop out under pressure. My JD 50 once had the same issues and the new O-rings cured it.

1950 model A powr- trol plug

Zmurray10

New User

matthies

Well-known Member

Mike(NEOhio)

Well-known Member

PJH

Well-known Member

Similar threads