Fits skid steer loaders with a Toro Dingo-style hookup

No George they are in a size of their own. Looks and works exactly the same but 6 inches narrower at top and shorter back plate. Will not mount on the standard skid steer hitch. Called a mini hitch
 
Note their are better attachments out there than the Titan brand. The are mid line or less depending on what day they were made. Have seen a lot of the back plates that pulled out of the hitch.
 
It's basically a stand on skid steer. I suggest looking at Artillian forks. They are lighter weight but still have the capacity of heavier forks. I'd post a link but I don't know enough about computers to know how. They won't be the cheapest option but they are good.
cvphoto41756.jpg
 
George that Dingo there is actually the largest produced and DOES in fact use standard skid steer attachments. Most of the Dingos are quit a bit smaller and use smaller attachments. Kubota will be entering that stand on market before the end of the year.
 
Our local ACE hardware has a rental department, they have a Dingo to rent that I bet it will go through a 36? gate, no more than a 40? at most. It is no taller than the hood of your average riding mower.
 
I didn't know they made the mini skid steers with full size attachments. That's just a picture I found online to show Geo what they were.
 
It might run circles.
What scares me (the one who invents death machines) no roll cage on dingo.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top