THANKS Jeffcat---

big tee · Oct 11, 2019

Jeffcat--I took your advice from my post yesterday about cutting a seal beam headlight apart with water to cool it and it worked like a champ--THANKS again---Tee

24 in.air cleaner cup from my old Donaldson days with water just covering 4.5 in. grinder blade-no glass dust!

Went around it a few times and had trouble scoring it so cut through it and worked my way around.When it finally came apart it followed the score line around...

A little rough but good enough

HAPPY--NO cracks--I am going to get a job as a diamond cutter now!!!!

jeffcat · Oct 11, 2019

Good going. Use the black wet dry paper on a perfectly flat surface. Use circular motion with a little water. It should go pretty quickly. Here is a guy at the Hershey car show who modernizes car head lights and i told him about your story. First thing he was yelling was about heat cracking glass. So you are in good company. His were Very nice and bright and aimed. Shame you don't have enough room. He even had 6 volt and 12 volt positive ground.

big tee · Oct 12, 2019

Thanks again--You are never too old to learn!!---Tee

THANKS Jeffcat---

big tee

Well-known Member

jeffcat

Well-known Member

big tee

Well-known Member

Similar threads