I have a relatively new Kuhn gyro rake (5 years old) which is the best rake I've ever owned.
Today PTO shaft will not come off tractor shaft. It will moved about 1/4 inch with collar pulled back and then stop. I have put LOTS of pressure on it to no avail.
I thought shaft might be bent but disconnected other end and it telescopes perfectly?
Today PTO shaft will not come off tractor shaft. It will moved about 1/4 inch with collar pulled back and then stop. I have put LOTS of pressure on it to no avail.
I thought shaft might be bent but disconnected other end and it telescopes perfectly?