Grumpydaniel
Member
Any idea where I can find rebuilt kits for the cylinders on my No. 31 Loader? It works great but the cylinders leak a little. Thanks!
- Thread starter Grumpydaniel
- Start date
Janicholson
Well-known Member
Why not have them rebuilt? Any ideas you get from us will be marginal if we do not know where you are in the world. Most hydraulic shops will/can get the parts to fix them. Unless badly scored, or rust pitted it should be reasonable. Jim
It's a big 'ol relatively low pressure system without chromed cylinder "rods" and a LITTLE leakage is probably normal.
Your photo isn't detailed enough so I can see if there's an adjustable "packing gland" that can be snugged up a bit, or not.
As to a "kit", the only way you are going to find a complete, "all-in-one kit" is if the OEM still offers one, have have you checked with "FIAT"?
If that doesn't work out, a good nearby hydraulic shop should be able to identify the individual seals and come up with replacements for them.
If no such place nearby, try calling Baum Hydraulics in Omaha.
Your photo isn't detailed enough so I can see if there's an adjustable "packing gland" that can be snugged up a bit, or not.
As to a "kit", the only way you are going to find a complete, "all-in-one kit" is if the OEM still offers one, have have you checked with "FIAT"?
If that doesn't work out, a good nearby hydraulic shop should be able to identify the individual seals and come up with replacements for them.
If no such place nearby, try calling Baum Hydraulics in Omaha.
rustyfarmall
Well-known Member
I have that same loader. Perfect match for a Farmall H. One of my cylinders leaks just a little, but only when the rig is parked with the loader all of the way down. Never leaks while in use.
It has probably been 10 years or so, but a friend of mine actually got a rebuild kit from Case-IH.
wilson ind
Well-known Member
Baum Iron omaha. About any seal you could want.
Grumpydaniel
Member
Thanks, guys. I'm pulling them apart this weekend, but will check with my local Case IH first. Seems like a good, reasonable start. I just ordered some other seals and gaskets from them.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy