Steve at Advance, when I took apart the carb, the brass jet port screw on the bottom half of the carb, near where the nozzle like tube sticks out was damaged. Whoever last worked on the carb stripped it. I think it is the jet port, and I think a replacement is coming in my kit.
Which way do I turn the little brass screw in the bottom half of the carburetor to I loosen it?
I figure since I opened the carb and see a damaged part, I should replace it.
John
Which way do I turn the little brass screw in the bottom half of the carburetor to I loosen it?
I figure since I opened the carb and see a damaged part, I should replace it.
John