Ultradog MN
Well-known Member
- Location
- Twin Cities
Ran one in the Navy so I know what one will do.
But I don't have a lathe.
So this evening I contrived this bushing on a bolt in a drill that was clamped in the vise.
Friend gave me a piece of delron and drilled the center hole for me.
The old bushing was rubber and was gone long ago.
Between an angle grinder, a couple different files and a hacksaw I got a bushing I like.
It snapped in there tight.
Will probably outlast a rubber one too.
That's my story and I'm sticking to it.
But I don't have a lathe.
So this evening I contrived this bushing on a bolt in a drill that was clamped in the vise.
Friend gave me a piece of delron and drilled the center hole for me.
The old bushing was rubber and was gone long ago.
Between an angle grinder, a couple different files and a hacksaw I got a bushing I like.
It snapped in there tight.
Will probably outlast a rubber one too.
That's my story and I'm sticking to it.