Fancy doodlebug

Bob N.Y.

Well-known Member
Location
Norway, N.Y.
Can anyone identify what kind of car this was? It looks big and expensive to me.
cvphoto17284.jpg
 
yep, just like on those tv shows those northerners living off the grid but they sure are clean and clean clothes and neat hair. this guy looks the same suit, nice hair and clean. humm, I don't think he had anything to do with loading that wagon. just the driver for a picture.
 
I think your spot on.

When I commented in an earlier reply that it wasn't a Packard I was think a little later
model
 
Some guys can work in the dirt and grease and manure and not get covered in it . I?m not one of those guys it?s takes me a bar of soap to get clean 🧼 enough to be seen in public
 
I smell a rat. 'Tractor' is way too close-coupled to the wagon- wagon would have had a long tongue for hitching to horses. Even if the tongue were cut down, it still would need to be longer than that.

I don't see much mud ahead of the rear wheels. Those lugs would throw a lot of mud forward.

Rear wheels/hubs look just a bit too modern. Front wheels are almost as big as the rears.

Driver and front are just way too tidy.

Photoshop is relatively new, but doctored photos have been around as long as there have been cameras...
 
It does look like that 1927 Packard. I am currently tinkering on a Model A Ford doodlebug that sat outside for 20 years. Most of it coming apart better than I expected.
 
Leon R, I agree with it being a Buick due to grill opening at the top with the drop down in center top. Front wheels are a mystery to me. Looks like artillery wheel hubs with steel centers riveted in and 5 bolts to attach outer rim to steel centers.
 
yeah.. think about how much room the transmission would take. IF that is real the Best fit would be the transmission was attached directly to the rear axle. and the heights for that don't look right either.

As for the hitch... could be right.. looks short.. often alot of the old horse drawn equipment still had the long drawbar so it would be WAY behind the "car-tractor".

as for the front wheels alot of those old/big cars had large wheels so no issues there i suspect.
 
I sent the post to a friend of mine who is into vintage autos. He says that it's a 1928 Buick Master Six 50 series. The steel disc wheels were a rare option (and look like Packard wheels from that era). Here's a link to a ton of photos ..... I'd say he's correct. Someone else already mentioned Buick.
Untitled URL Link
 
I wish I could find my father's cherished Doodlebug. He farmed with it for years till he got is first farm tractor.
 
(quoted from post at 08:04:10 03/22/19) I wish I could find my father's cherished Doodlebug. He farmed with it for years till he got is first farm tractor.
ere is a picture of a picture of a 28 buick master series. They do look a lot like Packards of the same period, I do believe there was a law suit between the two companies over the hood and grill design. I don't know who copied who. The other picture is of my 25 McLaughlin Buick master six touring.
mvphoto33267.jpg


mvphoto33268.jpg
 
5th Wheel wagons could be short tongued. ~6' would work. No matter what it has caught our eyes enough to warrant app possible answers. Jim
 
Yes, Oldsmobile 230 cu. in. Original. I have a restored truck and saved this for parts, hopefully don't need any more parts and thought it would make a good toy.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top