part number needed pto shaft

wsmedley500@comcast.net · Mar 18, 2019

Need the part number for a hydro shaft 9.5 in by .75in six spline on both ends for a ford 2000 4cl gas 63-64 front end loader thanks Bill

Bob · Mar 18, 2019

Do you know the model # of the loader?

If so, you may be able to look the part up in the on-line New Holland parts catalog.

I looked at the PC for the tractor and the front "stinger" pump and driveshaft are not shown there.

The coupling that mounts to the crankshaft pulley IS, though, part # 290421, which appears to be 10-spline.

THIS very sire (YT) lists a 10-spline shaft with a keyway at the other end, and also a 6-spline shaft with a keyway at the other end, look under "2000 hydraulic parts" and "NAA hydraulic parts".

Or is your loader another make than Ford?
Official NH parts lookup

old · Mar 18, 2019

Sounds like the common run of the mill drive shaft for the hyd pumps that is sold right here on Y-T. I've replace both mine on my 8N and 841S with ones that can be had from Y-T. Just look it up in the parts area or call them

wsmedley500@comcast.net · Mar 18, 2019

Not sure what kind of loader is on tractor. no numbers anywhere. all ford dealers say the same thing 6 spline shaft has a key in the other end. Was able to buy one years ago but that dealer now has no idea. Thanks for your efforts

part number needed pto shaft

[email protected]

New User

Bob

Well-known Member

old

Well-known Member

[email protected]

New User

Similar threads