Westling Mfg Company

CP1

Member
I have some clutch disc and clutch pressure plates new in the box that I got is some trading with a mechanic that used to do a lot of tractor work. Some
of the boxes have Westling Mfg Co on the boxes and part numbers. I would like to know what these parts fit so I could sell them. But I can?t seem to
cross the numbers and Westling ( are they still around) ? Anyone have an old Westling catalogue? Or know of a way to check these out? Thanks
 
A lot of parts makers/sellers will use either the same or a variant of the same part #'s.

Try looking up your numbers on another clutch suppliers website.

LUK Merriot etc.

You may have a part # 12-34567
Another supplier may have for example;

34567
LUC-34567
M34567
000 34567
LUC-12-34567
M12-34567

If you find numbers that seem to coincide with what you have then confirm it by checking the info provided for diameter, spline count, mounting circle etc.
 
If you Google Westling Mfg Company, you will find that it was (is?) located in Princeton, Minnesota.

For information related to a company you need to look at the Secretary of State for the applicable state.

The Minnesota Secretary of State's website shows that original business corporation filing for Westling Mfg. Co was in 1946. It's current status is inactive. It was administratively dissolved in 2007, with the latest annual filing in 2004. (A company is "administratively dissolved" after it fails to file required documents for a period of years--depending on the state.)
 
If all that fails, I'd probably take it to my friendliest parts guy, have him measure the specs of it for me if I wasn't good at that, and start through his clutch catalog. If I found THAT, I'd try to see what PP went with that disc. gm
 
Give me few part numbers of the Westling rebuilt clutch disks.
I might be able to tell you what they are.
 
(quoted from post at 09:10:36 03/12/19) I have some clutch disc and clutch pressure plates new in the box that I got is some trading with a mechanic that used to do a lot of tractor work. Some
of the boxes have Westling Mfg Co on the boxes and part numbers. I would like to know what these parts fit so I could sell them. But I can?t seem to
cross the numbers and Westling ( are they still around) ? Anyone have an old Westling catalogue? Or know of a way to check these out? Thanks

Did you get this resolved?

I finally found my old Westling catalog from the late 70's/early 80's and will check the numbers for you, if you'd like.

[email protected]
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top