(800) 853-2651
SHOP NOW

I think i got a 850


800 series was the general term for the 820, 850, and 860 tractors. Judging by the serial number and some info I found online, your 850 was made in 1957.
 
How to get it running? Fill with fresh gas .Put in fresh battery. Try it. Then check points. After that,we need more info.However if it has sat for a long time,carb is probably dirty'coroded. Points corroded. engine might be stuck...All bets are off.
 
(quoted from post at 08:49:31 12/31/18)
800 series was the general term for the 820, 850, and 860 tractors. Judging by the serial number and some info I found online, your 850 was made in 1957.
Click to expand...




Now saying that when i order parts what do i go with 800 850 or do they all have same parts
 
(quoted from post at 07:38:53 01/03/19)
(quoted from post at 08:49:31 12/31/18)
800 series was the general term for the 820, 850, and 860 tractors. Judging by the serial number and some info I found online, your 850 was made in 1957.
Click to expand...




Now saying that when i order parts what do i go with 800 850 or do they all have same parts
Click to expand...

Order parts for an 800. One of the nice things about Fords is the parts interchangeability over many many models.
 
(quoted from post at 13:24:40 01/03/19)
(quoted from post at 07:38:53 01/03/19)
(quoted from post at 08:49:31 12/31/18)
800 series was the general term for the 820, 850, and 860 tractors. Judging by the serial number and some info I found online, your 850 was made in 1957.
Click to expand...




Now saying that when i order parts what do i go with 800 850 or do they all have same parts
Click to expand...

Order parts for an 800. One of the nice things about Fords is the parts interchangeability over many many models.
Click to expand...

How could i get spark plug diagram for it
 
You must log in or register to reply here.

Similar threads

T
John Deere H
Replies
0
Views
184
treeman53
T
T
Ford Backhoe
Replies
3
Views
514
Blackhole49
Blackhole49
L
Quick Question - Should I Use Lock Washers on Flywheel Bolts?
Replies
2
Views
244
LarryMaine
L
J
Help with identifying my tractor year
Replies
10
Views
435
BarnyardEngineering
BarnyardEngineering
4
Fan shaft bevel gear
Replies
5
Views
198
Jim.ME
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top