(800) 853-2651
SHOP NOW

3010 tool box

J

jdfamily

Member
I am fixing up a 3010 John Deere using it for a loader tractor.
I am looking for two of the small tool boxes that attach to the fenders.
IF anyone has a couple to sell please let me know.

Thanks.
 
Is yours an industrial model or something ? I did not know of any tool boxes JD put on Row crop models except the ones they mount on the frame rails.
 
While JDfamily does not specify what type of 3010 he has, I am pretty sure the Row Crops came from the factory with a toolbox bolted to the right rear fender. JDFamily, I'd try EBAY.
 
I looked at the jdparts and they do show some by the fenders on rowcrops but they had a separate bracket and u bolt. Standard models mounted to the fender by what the pics show ?
 
This is the original toolbox from my dads 4010 rc. They were just bolted to the fender using the fender bolts. My dad took it off because it was to small to be useful.
cvphoto2871.jpg
 
No, I'd rather not sell it. That tractor is one of the few things I have left of my dad. He bought it new and it was his pride and joy till he died. It's not on the tractor but it's put up so I know exactly where it is.
 

Look no further Larry Anderson has the toolbox you need listed in YT classified ads on this discussion forum. Ad # is 896856 & he's asking $25. PS: Larry is an upstanding person as I've sold him a couple of tractors plus some dual wheel axle mount hubs
 
Our '63 4010-D had a tool box on the left side of the seat platform, had a flip-up lid, about the size of the one that bolted to the fender pictured here. Was that just a 4010 feature, not used on a 3010?

But like said, was too small to be useful. Dad made a BIG frame mount box bolted to left frame rail, was about 20-22 inches long, 10-12 inches wide and 6-7 inches deep, tall enough to hold couple quart cans of oil and 3-4 14 oz tubes of grease, crescent wrench, hammer, spare hitch pin, couple rags to wipe dipstick, or hyd couplings. Also made a nice platform to stand on when fueling tractor.
 
I thought the rockshaft toolbox didn't come out till the 20 series. Both my 2510's have them. My 4010 has one but I bought one at a sale and put it on. I'm not going to guarantee that though.
 
(quoted from post at 17:57:41 11/16/18) Our '63 4010-D had a tool box on the left side of the seat platform, had a flip-up lid, about the size of the one that bolted to the fender pictured here. Was that just a 4010 feature, not used on a 3010?
Click to expand...

According to PC 691 for a 4010 & my memory the toolbox in rockshaft cover wasn't offered for 3010 or 4010

mvphoto26891.png
 
You must log in or register to reply here.

Similar threads

R
Looking for advise on tractor purchase
Replies
12
Views
577
jm.
jm.
D
Tractor tires
Replies
6
Views
483
Denteen
D
B
Farmhand F258
Replies
5
Views
254
brent!
B
D
Farmall 300 tool box
Replies
4
Views
321
dewy
D
H
John Deere 70 Pony Motor
Replies
4
Views
657
buickanddeere
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top