loader bucket

Kirk-NJ

Well-known Member
Anybody know what this loader bucket is off? It's 42" wide. Single piston.

<a href="https://imgur.com/fjwvRa0">
fjwvRa0l.jpg" title="source: imgur.com"
</a>

<a href="https://imgur.com/6bHooCf">
6bHooCfl.jpg" title="source: imgur.com"
</a>
 
Could be from any number of small older loaders.And on any number of old tractors.Doesnt look brand specific to me.
 
Looks real similar to the bucket on my 8N, ( Wagner loader )don't know what model all I can make out on the serial plate is Wagner.
 
Measure the distance between the pivot pins. If it's 36" it's likely a Wagner. There is an early and late Wagner bucket. The early one is very deep, this one looks like the later less deep but taller bucket.
 
Shape looks Wagner, but all the
wagners I saw had the dump cylinder on
top never below the arms like that
 
(quoted from post at 09:27:35 11/14/18) Shape looks Wagner, but all the
wagners I saw had the dump cylinder on
top never below the arms like that

Second pic it's upside down. The pivots are at the bottom of the bucket.
 
Case made a loader for the 300 round nose tractor that had one cyl. to dump it.It was a short run loader.
the whole loader was painted Desert Sun set. clint
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top