Back blade with hydraulic swivel

Ultradog MN · Nov 8, 2018

Who makes a back blade with hydraulic swivel/pivot on the blade.
I know they make a hydraulic swing but I want hyd swivel.
About 8' or 9' Cat II
If I knew some brands or models I could search for those specifically.
I'm not sure what to call it.
The blade below is nice but the hyd pivot (if you added the cylinder) is in the front - to swing it side to side. I want to move the blade.
Thanks
Not what I want

Eric in IL · Nov 8, 2018

I've got a Big Ox with three cylinders. One for tilt, angle, and swivel. It sounds like you are shopping for angle. I'd imagine Woods and several other companies have what you want.

David from Kansas · Nov 8, 2018

Land Pride makes a heavy duty blade.

Jim in rush co · Nov 8, 2018

Check out Land Pride RBT 3596, it has offset, angling and tilting. If I want to turn blade backwards I have to pull rear pin on angling cylinder rotate blade and hook cylinder back up.

Case Nutty 1660 · Nov 8, 2018

I sold Farm King/Allied products designed and made by Farmers,, I really like the 8' and larger HD blades with hyd control and I sold a good number of them I still have one here today,, the others listed I think are well built brands also
cnt

Traditional Farmer · Nov 8, 2018

I have a Woods that does all three.

504 · Nov 8, 2018

I do like my Land Pride(no hyd)but it is heavy enough that it has broken the three point hitch on two tractors and not bent the blade.

gfj · Nov 8, 2018

See if you can find a john deere 155.

onefarmer · Nov 8, 2018

Check out the Frontier blades @ johndeere.com They have hyd everything in the bigger stuff.

David G · Nov 8, 2018

Land Pride

Weldon K · Nov 8, 2018

some manufacturers Landpride , Rhino , Bush hog, Allied, Deere , Woods

Cliff Nelson · Nov 8, 2018

We have a Rhino with 3 way hyd. Never use the offset but the other 2 get used a lot. It was cheaper with the 3 way set up than just 2 way. Good heavy blade.

Dr. Walt · Nov 8, 2018

Ultradog MN - Am I safe in assuming that you want to SWIVEL the Blade Hydraulicly , NOT Tilt or Angle it . If so , It shouldn't be too hard to modify a "standard" Back Blade by attaching the top of the blade post to a Hydraulic Motor , run your lines to your Hydraulic power source and control it with an Orbitrol Valve in the Operator's Station .

Eldon (WA) · Nov 9, 2018

I have an Allied/Buhler 8' blade with the hydraulic angle. First year I used it to plow snow I hit a frozen rock and popped a hydraulic hose on the cylinder....it should really have a relief valve circuit on the cylinder.

Ultradog MN · Nov 9, 2018

Thanks fellas.
I couldn't use the 3 way type as I only have dual remotes and use one side I use for a hydraulic top link - which I'd be loathe to lose. I have thought about rolling my own.
I have an 8' cat II King Kutter that is nothing special. Take it in hand and add the cylinder and pivot points. Might be a fun project.
Meanwhile I'll keep looking for a used store bought one.

Jim in rush co · Nov 9, 2018

Most of the 3 way function blades can be purchased all hydraulic, or all manual or what ever function you wand hydraulic.

Ronnie Budd · Nov 9, 2018

I have a 10 foot Woods that does all three. It's a very heavy built piece of equipment.

Back blade with hydraulic swivel

Ultradog MN

Well-known Member

Eric in IL

Well-known Member

David from Kansas

Well-known Member

Jim in rush co

Well-known Member

Case Nutty 1660

Well-known Member

Traditional Farmer

Well-known Member

504

Well-known Member

gfj

Member

onefarmer

Well-known Member

David G

Well-known Member

Weldon K

Member

Cliff Nelson

Well-known Member

Dr. Walt

Well-known Member

Eldon (WA)

Well-known Member

Ultradog MN

Well-known Member

Jim in rush co

Well-known Member

Ronnie Budd

Member

Similar threads