Friday "Extra" Pic

kcm.MN

Well-known Member
Location
NW Minnesota
tractor-mounted hydraulic chainsaw
24712.jpg
 
That's what I thought also, but the photo description is what I went by. Is a very low quality photo, so difficult to be certain -- at least for someone not familiar with these things (like me!).
 
dad has an old hydraulic chainsaw. It has a PTO run pump then the saw has a motor on it. The bar is about 30 inch and 4 inches tall. Used a 9/16 chain. Two 3/4 hoses about 20 feet long to connect the 2. Would kill the H if the chain stuck on to big a bite.
 
You guys are right that one is NOT hydraulic driven. It is straight gear of the pto but they had a deal in that little right angel box so when you raised the bar the saw stopped then as you went back down it locked up and the chain turned. It would saw good with the tractor at idle .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top