Farmall 350 belt

Ji Case 35172 · Aug 11, 2018

I have a Farmall 350 and the fan belt is cracked up so I am going to change it today how do I get the fan off to get at the pulley?

rustyfarmall · Aug 11, 2018

You lossen the belt if you can, or if you can't, you roll the belt off the pulley and then work it up and over the fan and pull it out. Prepare yourself for some scraped up knuckles.

Removing the fan involves removing the radiator first.

old · Aug 11, 2018

As rusty say it will come off with out taking the fan off. You do have to hold you mouth just right and be sure your ready to have battle scares

Gary Mitchell · Aug 11, 2018

Old, much truth and humor in your reply. gm

old · Aug 11, 2018

Well of course I learned about doing it the hard way as in doing one on a 450 which is pretty much the same thing as on a 300 or maybe I did one on the 300U which again is not fun

Case Nutty 1660 · Aug 11, 2018

Boys gave good advise,, if the old one is junk I would cut it off then it will be easier to get the fan pulley loosened for installing the new one,, just a idea
cnt

Farmall 350 belt

Ji Case 35172

Member

rustyfarmall

Well-known Member

old

Well-known Member

Gary Mitchell

Well-known Member

old

Well-known Member

Case Nutty 1660

Well-known Member

Similar threads