john deere 535 bale trak

mnoliverguy · Jul 30, 2018

monitor was working fine when last used last week today no lights no response. Has power but will not work we checked the simple things every thing seems to be in order. Baler will manual tie. any Ideas??????

JD Seller · Jul 31, 2018

Take the back cover off the monitor and look. IRC the early ones had a fuse on the back of the circuit board.

SVcummins · Jul 31, 2018

The baler should auto tie with no monitor . Might have to chase wires and see why the monitor isn?t working . This is what makes your bale size and starts the auto tie

Roger in Iowa · Jul 31, 2018

Find number 9 pin on the end of the harness coming out the monitor. It is a ground. Use a paper clip from it to the other pins and it will make all the monitor functions work. If not, no power to the inside of the monitor.

john deere 535 bale trak

mnoliverguy

Member

JD Seller

Well-known Member

SVcummins

Well-known Member

Roger in Iowa

Well-known Member

Similar threads