John Deere 48 loader control bracket

jdfamily · Jul 30, 2018

Hey guys, I bought a good John Deere 48 loader for some light use here on my acreage, mostly snow removal.
It does not have the bracket that attaches to the loader and holds the hydraulic valve controls. Anybody know
where I might find one off a wrecked loader?? Or the dimensions and I could make one. It bolts on to the
frame of the loader and extends back towards the driver.

Thanks.

tomstractorsandtoys · Jul 30, 2018

Where are you located? Do you need a valve as well? I have the complete assembly with the bracket,valve and levers here that I would sell for $350. Tom

730virgil · Jul 30, 2018

Tom I know have busy have you got a chance to get pictures of right side panel for 2510?

jdfamily · Jul 30, 2018

I have the valve and the hoses just need the bracket. Willing to sell that?

tomstractorsandtoys · Jul 30, 2018

I have the pics but I am not smart enough to send them. I need to get the wife to do that. Hopefully yet today. Tom

tomstractorsandtoys · Jul 30, 2018

I do not want to break it up as more than likely I will find a loader with no valve and use the whole thing. Tom

Brendon Warren · Jul 30, 2018

I think I have one if you can give me a little time to look.

Kansas4010 · Jul 30, 2018

Probably some of the worst pictures ever but maybe they'll help.

730virgil · Jul 30, 2018

I know what you mean Tall Kid has bailed me out more than once. he is like Dad I have showed this before, I know I'm a slow learner.

jdfamily · Jul 30, 2018

Thanks that would be great, just let me know if you find one, I am trying to get it mounted now, it is on the ground
so a little heavy lifting, got the mounts on the tractor so getting close. I think I need to find a neighbor with a
loader to pick it up a bit. My phone is 303-619-1329.

Brendon Warren · Jul 30, 2018

There was one in my late father's things at his other farm. I'll try to go have a look in the next day or so.

ss55 · Aug 1, 2018

Like mounting brackets, Deere used different valve brackets for different size tractors. The valve bracket for a 4020 is much different than on for a 2020 utility tractor. Check the free online parts lists for a picture, or have a local shop fab one up for you.

jdfamily · Aug 1, 2018

Thanks for all the information and comments. Got the loader mounts and the loader on the 3010 yesterday, bit of a job when it is flat on the ground. The valves are just on the platform for now, but working.

Now my question is this. To make the valves work I need to put some pressure on the handle for the normal tractor hydraulics while running the valves. How do I set that tractor dash hydraulic lever so there is pressure to the loader valves? Thanks in advance

Tx Jim · Aug 1, 2018

If you have ind loader valve supply hoses plugged into rear breakaway couplers you need to tie scv lever forward or rearward depending on which side loader valve pressure(in) hose is plugged in. Loader would operate better if you attached loader supply hoses directly to tractor hyd system routing return oil to rockshaft oil return line or ported hyd filter cover.

John Deere 48 loader control bracket

jdfamily

Member

tomstractorsandtoys

Well-known Member

730virgil

Well-known Member

jdfamily

Member

tomstractorsandtoys

Well-known Member

tomstractorsandtoys

Well-known Member

Brendon Warren

Well-known Member

Kansas4010

Well-known Member

730virgil

Well-known Member

jdfamily

Member

Brendon Warren

Well-known Member

ss55

Well-known Member

jdfamily

Member

Tx Jim

Well-known Member

Similar threads