What's a good price, cultipacker

grandpa Love · May 21, 2018

Is free good!? Fellow I'm working
for says it's junk and I could
have it. I didn't argue long!

grayrider · May 21, 2018

You lucky dog, I been wanting one for years, was planning on taking a drag type and build a three point hitch on one. If that?s an 8 footer I?ve seen them priced around $400-800 dollars used down here in Covington County

grandpa Love · May 21, 2018

This is a drag one. With some busted wheels. And a few broken welds. But the price was right. Lol

grandpa Love · May 21, 2018

I bought this level all last Friday. It's killer. Looks like a tiller ran through the garden.

RobCons · May 21, 2018

You are lucky. I've been watching for one but they are few and far between.

Ande · May 21, 2018

Man, it sure is!

Ande · May 21, 2018

Great find, I would have uses for it! Right now!

greenmech · May 21, 2018

You can practice welding on it. Ron MN

grandpa Love · May 21, 2018

Great idea. I need lots of practice!!

GordoSD · May 21, 2018

It is missing all the tooth wheels between the packers. Lots of work to repspace those wheels and fix wood bearings.

tomturkey · May 21, 2018

Yes the star wheel spacers are gone between the rollers. Take a chain saw and cut some oak blocks get a hole saw and cut holes in the blocks. Make the blocks long enough to tighten up the spaces between the rollers and your good to go. Soak the blocks in oil, drill a hole from the top of the block into the axle hole for an oil reservoir. gobble

Kansasredneck · May 21, 2018

Man! Sounds like you got tricked into hauling off the old junk. Don't be so gullible next time or pretty soon you will have a collection of yard art and no place to put it... Like me.

Traditional Farmer · May 22, 2018

Its a rare thing in my area (VA) to find a cultipacker with the teeth, they most were made that way the one that's pictured with no teeth.

Traditional Farmer · May 22, 2018

You can turn that into a useful packer pretty easy,you could put a 3pt on it and take the wheels and slide them up tight together on the shaft and put collars on the outside the wheels to keep them tight just wouldn't have quite as wide of coverage no big deal.

What's a good price, cultipacker

grandpa Love

Well-known Member

grayrider

Well-known Member

grandpa Love

Well-known Member

grandpa Love

Well-known Member

RobCons

Well-known Member

Ande

Well-known Member

Ande

Well-known Member

greenmech

Well-known Member

grandpa Love

Well-known Member

GordoSD

Well-known Member

tomturkey

Well-known Member

Kansasredneck

Member

Traditional Farmer

Well-known Member

Traditional Farmer

Well-known Member

Similar threads