jkbemdavis
Member
I recently acquired an old trailer that had what was
prob a 150 gallon tank ( or more ) and this pto
driven pump mounted on it. My plan is to convert
the trailer to a log/wood wagon. I was initially
thinking I would scrap the old tank (rusted with
some holes) and pump because it is super heavy,
but I can still spin the shaft by hand. Any thoughts
on how I could check to see if it might work and
therefore be saleable or useable in my pumpkin
growing operation? I'd rather not spend a lot trying
to figure out how operable it is. I appreciate any
thoughts.
prob a 150 gallon tank ( or more ) and this pto
driven pump mounted on it. My plan is to convert
the trailer to a log/wood wagon. I was initially
thinking I would scrap the old tank (rusted with
some holes) and pump because it is super heavy,
but I can still spin the shaft by hand. Any thoughts
on how I could check to see if it might work and
therefore be saleable or useable in my pumpkin
growing operation? I'd rather not spend a lot trying
to figure out how operable it is. I appreciate any
thoughts.