3020 John Deere

SVcummins · Nov 2, 2017

Bought me a 3020 powersift

flying belgian · Nov 2, 2017

First thing I always do when I buy a piece of used equip. is paint the wheels. Don't take long, easy to do with a brush and seams to make the whole thing look 10 times better.

tomstractorsandtoys · Nov 2, 2017

It looks to be all original and that is often better than a bad paint job. I have bought much worse looking ones. I bought a hood tool years ago at a tractor show that is tapered like the Deere hood. With some time and patience your hood could be fixed up good. We have four 3020's here on the farm and have parted several out as well.I always though a 3020 powershift would be nice on the haybine or the small square baler. Mine are all syncro tractors. They make a nice chore tractor. Tom

Bob Bancroft · Nov 2, 2017

Why not a 4020 power shift? About as handy as a 3020. Mine doesn't get used enough to keep it any more. It's going.

SVcummins · Nov 2, 2017

Already have a 4020 Synchrio and I love it she?s my big horse been wanting a 3010 or 3020 really bad kinda wanted a gas but I think I?ll Like the diesel engine better it has a new injection pump and they have converted it to a 12 V system

tomstractorsandtoys · Nov 2, 2017

I would trade two 3020 gas syncros for your 3020 diesel. Interested? Tom

tomstractorsandtoys · Nov 2, 2017

I have two 4020's and a 4010 on the farm and three other 4020's that will get sold if I ever get them thru the shop. Tom

coonie minnie · Nov 2, 2017

What's wrong with the 4020's? Wanna trade one for a 2510?

tomstractorsandtoys · Nov 2, 2017

The 4020's were bought to resell. One needs to be changed to 12volt and a leaking fuel tank replaced. Another one gets a diesel engine to replace the gas. The other is in the paint bay and ready to paint the yellow but I just have not had the time lately. Working at finishing a grain bin floor and have to rebuild a cattle shed that the wind took down this spring. I would maybe trade in a 2510 but would not trade for a 2510 unless yours is powershift. Tom

coonie minnie · Nov 2, 2017

It's a diesel syncro, narrow front, dual hydraulics. I've put a big hydraulic pump on it, redone the power steering, new wiring harness, etc in the past 5 years, but it is pretty little around here. Thinking of selling it and finding a decent 4020 or 4320.

Let me know when you have a 4020 that is for sale. A 4320 would be better yet

NY 986 · Nov 2, 2017

I wish the timing were different. Word just came out in the last couple days of a '72 4020 near by that will be up for sale next year so I am angling for that (if possible). Yours is a '65 is it not? I wish I could do both as a second loader tractor (open station) would be nice to have.

pms · Nov 2, 2017

Bought this one a few days ago.Came with a loader.

Paul

wolfman · Nov 2, 2017

How many hours on the 4020PS ? Want to trade it for a late 684 and a couple pennies?

rdhRDH · Nov 2, 2017

Don't know where you are located, I am in Colby, Ks. Have a slick 4320 I may sell I bought a 4630. Phone 913-709-6593

coonie minnie · Nov 3, 2017

Im in SE WI.

SVcummins · Nov 3, 2017

I?d like to get that hood tool my 4020 hood is in need of reshaping to

SVcummins · Nov 3, 2017

Yip I will pain the wheels on this and my 4020

Scott 730 · Nov 3, 2017

(quoted from post at 15:21:36 11/03/17) I?d like to get that hood tool my 4020 hood is in need of reshaping to

www.sunsdahltooling.com

3020 John Deere

SVcummins

Well-known Member

flying belgian

Well-known Member

tomstractorsandtoys

Well-known Member

Bob Bancroft

Well-known Member

SVcummins

Well-known Member

tomstractorsandtoys

Well-known Member

tomstractorsandtoys

Well-known Member

coonie minnie

Well-known Member

tomstractorsandtoys

Well-known Member

coonie minnie

Well-known Member

NY 986

Well-known Member

pms

Member

wolfman

Well-known Member

rdhRDH

Member

coonie minnie

Well-known Member

SVcummins

Well-known Member

SVcummins

Well-known Member

Scott 730

Well-known Member

Similar threads