Same Project, two new storagae bins 1 90' diameter and 1 105' diameter, fill drags and reclaim drags, plus fans, controls, etc.
Second pic is running conduits up one of the towers, out of a crane basket. (13) conduits, ranging from 2" to 1"
Third pic is a wire rack I built on one of my trucks (flatbed) to pull (31) #10 thhn up in a 2" (for roof fan motors) yes, de-rating was figured in)
Fifth pic is a wire cart i built (custom) to pull the (31) #10 thhn laterally across the catwalk. Had to have something to hold that many conductors and fit on the catwalk!
The others are different views from on the catwalk. The catwalk is roughly 120' above grade. Lots of conduit work up there. All fabricated on the ground and hoisted up.

One fill drag is 60 HP and the other is a 50 HP dual drive, (2) 50 HP motors.

Ill post more here sometime.
<image src="http://forums.yesterdaystractors.com/photos/mvphoto3214.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3215.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3216.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3217.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3219.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3220.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3221.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto3222.jpg"
 
Very nice work AS fellow electrician I can appreciate what it takes to make it look that good. Looks like you will make it before harvest. I now work for company that does the grain system part of that project, I mainly work dryers. Our biggest so far is a million and half bushel bin and a 165 foot leg all certified 20,000 an hour.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top