Any interest in Syracuse sod breaker plows?

Eldon (WA)

Well-known Member
Dug these out of the weeds today, 4 good points, 2 good moldboards.
mvphoto2746.jpg

mvphoto2747.jpg

mvphoto2749.jpg

mvphoto2750.jpg
 
Are the beams stamped with a number on top at all if not could you measure the with and height of the beams as best you can, these
look very similar to the old style John Deere gang plows
 
I agree. Worth quite a bit to the right person restoring a gang plow to be used by a large gas prairie tractor or steam.
 
(quoted from post at 04:45:05 08/29/17) Are the beams stamped with a number on top at all if not could you measure the with and height of the beams as best you can, these
look very similar to the old style John Deere gang plows

The beams are stamped 264 and 268
 
it should read 264/265 they are for a John Deere gang plow like used behind a steam engine, they are the lighter version do not scrap, I am looking for 364/365 they are for the heavy gangs but these would fit to bad you are so far away
 
(quoted from post at 09:11:52 08/29/17) it should read 264/265 they are for a John Deere gang plow like used behind a steam engine, they are the lighter version do not scrap, I am looking for 364/365 they are for the heavy gangs but these would fit to bad you are so far away

Too bad my trunk isn't bigger, headed to SD tomorrow....
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top