Hi everyone,
Im new here and new to all things tractor. long story short the steering shaft snapped. I replaced w/ new aftermarket shaft along w/ new upper and lower bearings. I ran into this problem while putting the steering box back together. no matter how many shims i use that still looks like a bit of room between the tube and the steering box. the bearings are seated correctly. did I do something incorrectly. Thanks in advance.
<image src="http://forums.yesterdaystractors.com/photos/mvphoto1907.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto1908.jpg"/>
Im new here and new to all things tractor. long story short the steering shaft snapped. I replaced w/ new aftermarket shaft along w/ new upper and lower bearings. I ran into this problem while putting the steering box back together. no matter how many shims i use that still looks like a bit of room between the tube and the steering box. the bearings are seated correctly. did I do something incorrectly. Thanks in advance.
<image src="http://forums.yesterdaystractors.com/photos/mvphoto1907.jpg"/>
<image src="http://forums.yesterdaystractors.com/photos/mvphoto1908.jpg"/>