What do these hydraulic end adapters fit?

rockyridgefarm · Dec 22, 2016

Hey all,

Bought a coffee can of hydraulic tips and adapters, and was wondering what these adapters fit.

Oliverfan · Dec 22, 2016

Those are Metro tips. With the female part mounted on the tractor, the hydraulic hoses
could be easily hooked up under pressure.

rockyridgefarm · Dec 22, 2016

(quoted from post at 15:26:48 12/22/16) Those are Metro tips. With the female part mounted on the tractor, the hydraulic hoses
could be easily hooked up under pressure.

Do they fit a particular tractor? Is anyone looking for them, or are they just something to pitch in the metal barrel?

Oliverfan · Dec 22, 2016

They were sold as aftermarket items and would fit any tractor.

As far as value, who knows. The right person, the right time, the right place, etc.
etc. etc.

coonie minnie · Dec 22, 2016

Reminds me of something to AI sows...

Traditional Farmer · Dec 22, 2016

My Oliver 1550 with a loader came with that type fitting

Eric in IL · Dec 22, 2016

Those would not work for AI because they are right-hand threads. lol

Dad and I used to joke about buying a boar with left-hand threads when we went boar shopping.

Several years later dad went to a class on AI and found out that boars actually had left-hand threads.

rockyridgefarm · Dec 22, 2016

(quoted from post at 16:32:12 12/22/16) My Oliver 1550 with a loader came with that type fitting

Do you want them?

Bob · Dec 22, 2016

Yes, "Metro" hydraulic tips, but in the real world, useless as mammary appendages on a boar.

matthies · Dec 22, 2016

There was a joke about a guy with a cork screw -ock and then he finally found a gal with a cork screw -unt, but found out later she was left hand thread.

4520BW · Dec 23, 2016

If he finds one with right hand threads she will probably be fine threaded. Cross thread is better than no thread I guess till they get dog knotted.

Russ from MN · Dec 23, 2016

They must not be very popular, when I googled Metro- tips I found advice for public transportation in large cities! I wish I had quick disconnects that were easier to connect under pressure. Once I left our wood splitter out in the hot sun and I had trouble connecting it to the tractor, if it happens again I will just loosen one line.

What do these hydraulic end adapters fit?

rockyridgefarm

Well-known Member

Oliverfan

Member

rockyridgefarm

Well-known Member

Oliverfan

Member

coonie minnie

Well-known Member

Traditional Farmer

Well-known Member

Eric in IL

Well-known Member

rockyridgefarm

Well-known Member

Bob

Well-known Member

matthies

Well-known Member

4520BW

Well-known Member

Russ from MN

Well-known Member

Similar threads