Waukesha motor

Alan D Harmon · Nov 1, 2016

Working on a 1936 Waukesha F.C.9 like to find manual. There is a hole blow the mag do not know if it is a freeze plug or what.
Motor is in a 1936 case r c.

casenut1 · Nov 1, 2016

I have a 36 RC. Will look and see if I can determine what it is. Get back to you as soon as I can.

casenut1 · Nov 1, 2016

Had to refresh my memory on that tractor. That hole is for a cast elbow for the lower radiator hose. A bolt threads in through the elbow into the block. Yours is like mine , the blot has rusted off inside. Sounds like you also have lost the elbow and bolt. Should be able to find one in a good tractor yard.

casenut1 · Nov 1, 2016

Where are you located?

D beatty · Nov 1, 2016

Here is a picture of my RC Case. That's the opening for bottom out let to radiator .

Alan D Harmon · Nov 1, 2016

found this tractor in a grove pine trees I live in wiggins CO. got the tractor apart put new seales and gaskets ready for sand blasting. Had no fenders so I am making some. Will have to find some thing or make some thing to fill the hole.
Thanks for the info. and photo.

Gary Reif · Nov 2, 2016

I have one of those engines stored in my shop. I can check it out tomorrow. Might even have one of those elbows from a parts engine I have stored away. Gary

Alan D Harmon · Nov 3, 2016

Hi Gary thanks for the info. call about the elbow 970-483-6234

Dennis WEHS · Nov 3, 2016

Alan, the FC was a very popular engine which was made by Waukesha from 1935 to 1973 with about 140,000 built. The Waukesha Engine Historical Society has manuals. Contact us at [email protected] and visit our web site at www.wehs.net

Waukesha motor

Alan D Harmon

Member

casenut1

Well-known Member

casenut1

Well-known Member

casenut1

Well-known Member

D beatty

Well-known Member

Alan D Harmon

Member

Gary Reif

Member

Alan D Harmon

Member

Dennis WEHS

New User

Similar threads