OT parts chaser

Heyseed · Oct 10, 2016

How do I reset the "Maintenance required" warning light on a 2007 Toyota Tacoma. I did all the service work but can't figure out how to reset the light. Nothing in the owners manual about it.
thanks.

retired farmer · Oct 10, 2016

Get on -You Tube- and type in Reset maintenance light. Tells you how to do it.

Heyseed · Oct 10, 2016

Thanks, I forget to use Youtube and I should know better.

roaddevil49 · Oct 10, 2016

You could disconnect the battery or use the tbe obd port and cancel with obd tool.

Billy Shafer · Oct 10, 2016

Nice countryside.

SweetFeet · Oct 10, 2016

When I looked to reset my Toyota Corolla after my husband did an oil change, I had trouble finding instructions that made sense. Everything I found made reference to a trip-meter rather than calling it "Display" button which is the word that's actually the name for that button.

So in case your pickup is similar to our car, here are INSTRUCTIONS FROM OUR MECHANIC:

Insert key in ignition (leave it in the OFF position).

Press & hold down the Display button (mine is on lower/left side of steering wheel).

While continuing to hold down the Display button, turn key ON to accessory position.

Continue holding the Display button down until all of the "dash lines" disappear one-by-one from the display on your dash.

Let go of Display button and turn key to OFF position. It's reset now.

36Coupe · Oct 10, 2016

Nothing in the owners manual about it.
thanks.

Page 162 in the Owner's Manual tells you how to reset the Maintenance required light!

4wdtom · Oct 10, 2016

A .45 caliber hole might put it out. I hate those things.

OT parts chaser

Heyseed

Member

retired farmer

Well-known Member

Heyseed

Member

roaddevil49

Member

Billy Shafer

Well-known Member

SweetFeet

Well-known Member

36Coupe

Member

4wdtom

Well-known Member

Similar threads