Can I get away with it?

biggerred · Feb 3, 2016

Can I get away with using a Charlyn/Eaton PS pump on a Behlan PS motor/unit?

JD Seller · Feb 3, 2016

If the pressures and flow rate are about the same the control unit will not care where the pressure fluid comes from. I am not sure but I have worked on both units and I think the pressure an flow would be about the same.

John_PA · Feb 3, 2016

PS? Power steering? Last time I checked, the motor didn't care what brand fed it the pressurized hydraulic fluid. Where is your concern?

John_PA · Feb 3, 2016

Beat me there by 16 seconds. I must have been replying while you were sending.

David G · Feb 3, 2016

I have a Delco PS pump on my char lynn

biggerred · Feb 3, 2016

That was my concern. The flow rates and such. I know brand names don't matter, just output.

Can I get away with it?

biggerred

Member

JD Seller

Well-known Member

John_PA

Well-known Member

John_PA

Well-known Member

David G

Well-known Member

biggerred

Member

Similar threads