Need help! Wd45

Dale c mi · Feb 1, 2016

New to me 45 on the Allis page. Can I push the pistons and sleeves out at the
same time and cut the pistons out with a side grinder to save the rods? Thanks
Dale

blue924.9 · Feb 1, 2016

(quoted from post at 18:40:09 02/01/16) New to me 45 on the Allis page. Can I push the pistons and sleeves out at the
same time and cut the pistons out with a side grinder to save the rods? Thanks
Dale

Well anything is possible, not sure why you wouldn't want to do it normally? If your trying to cut time motor work isn't where I would cut it from

VicS · Feb 1, 2016

Dale c mi · Feb 1, 2016

Did you look at the engine on Allis site?

blue924.9 · Feb 2, 2016

(quoted from post at 18:48:52 02/01/16) Did you look at the engine on Allis site?

If your taking to me then no I did not

Need help! Wd45

Dale c mi

Member

blue924.9

Member

VicS

Well-known Member

Dale c mi

Member

blue924.9

Member

Similar threads