rusty6

Well-known Member
I have a few minutes of video from this year's harvest on youtube. Back when the sun was shining and the wind blowing dust everywhere.
Doing flax with the pull type and wheat with the self propelled. Still got 130 acres of flax swaths to do but with the latest snow on the ground I don't think it is going to happen.
https://youtu.be/nlx2dVAzKgw
2015 Harvest
 
You always make great videos. Nice that you can leave the duals on the tractor. How common or rare was the 7721 over there? Are there any 9501s?
 
Nice Videos. Way back in the 70's I ran a C2 Gleaner doing flax. We had to seal a lot of areas on the machine to keep the seed from leaking thru cracks.
 
I was afraid the videos were getting too long so I trimmed whatever I thought I could. And that included old Roosty. He might show up again though.
 
Loren, I did not record any of this year's wheat swathing with the "MacJohn" 2360 but I have one of the canola. Pretty sure
there are wheat swathing videos back a year or two (or three).
SDPete, no problems with leakage of flax on this one but flax straw wrapping around almost every rotating
shaft is the biggest problems. Nearly burned it down last year when straw wrapped around the return drive shaft so
tight that it burned the paint off the cylinder housing by the time I saw smoke coming out the feeder house.
Greenenvy, those 7721 combines were very popular and the smaller 6601 as well. By the time JD introduced the 9501
there was not as much interest in pull type machines and there were not a lot of them sold. I have seen only a
very few advertised used.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top