Anyone know who made JD chainsaw CS40LE?

Tx Jim · Nov 12, 2015

It seems my "not so old JD CS40LE chainsaw" has no parts support from JD. I need the stud that attaches bar onto housing part number PS03708.
Thanks,Jim

Bret4207 · Nov 12, 2015

I think that's an Efco 940. See if this is your saw, If so, you should be able to find parts pretty easy. The stud should be this one-http://www.lawnmowerpros.com/detail.asp?id=50050052R

http://www.efcopower.com/sites/default/files/Efco_936LE-940LE.pdf
http://www.efcopower.com/sites/default/files/940_IPL.pdf

JOCCO · Nov 12, 2015

YES EFCO used to be olimpic dealer support is lacking in most areas.

Ozlander · Nov 12, 2015

Probably a Homelite CS40 saw.

longmeadowfarm · Nov 12, 2015

I have a Deere CS62, took it to the dealer I bought it from and asked to have the carb rebuilt..asking them to check it out and get back to me with the estimate. They gave
me an estimate of 270 bucks..seems that Deere doesn't carry the carb rebuild kits but had a replacement carb. The small equipment service manager took me aside and
told me Deere was dropping the parts support for this and other Deere equipment ..like my weed wacker. I located the parts I need at an Efco dealer..as it is an Efco saw...
a winter time project.

Old weldor · Nov 12, 2015

At one time Remington built JD chainsaws.

Russ from MN · Nov 12, 2015

Probably get a kit online for <$10

jeffcat · Nov 12, 2015

Just walk into a couple of saw repair joints. They should be able to fix ya up. Standard or metric a lot of those studs drive out and into the oiler tank. Most likely you will need to pull the whole front of the saw off to fix it. If not then send it down the river.

Tx Jim · Nov 13, 2015

Thanks for everyone replies,I found the part I needed.Jim

bteny10 · Nov 13, 2015

doing some research got 3 different answers for that saw a company in Italy echo an Koritz so thats what i came up with hope that
helps you in the future

bteny10 · Nov 13, 2015

according to a guy that works at john deere says it is manufactured in italy by emak in Florence

Anyone know who made JD chainsaw CS40LE?

Tx Jim

Well-known Member

Bret4207

Well-known Member

JOCCO

Well-known Member

Ozlander

Well-known Member

longmeadowfarm

Member

Old weldor

Member

Russ from MN

Well-known Member

jeffcat

Well-known Member

Tx Jim

Well-known Member

bteny10

Member

bteny10

Member

Similar threads