farmhand F11 F-11 loader questions

jimkurk · Jul 12, 2015

am ready for a loader on my 770 Oliver and have set out to find an F11 F-11 farmhand, can anyone tell me the difference between the different models especially the black stripe model, was there any difference in the width of these loader? buy just looing at pictures it seems there are some that are wider than others. any information would be greatly appreciated

DeltaRed · Jul 12, 2015

As far as I know,All F-11s are the same. The "Black Stripe" are the latest 'version'. There are improvements over the years. From
a straight (angle iron) cross tie,to the arched one.The later arches had the hoses pas through it."Premium Strength Steel" was
another improvement.An F-11 is an F-11. The mounts were somewhat different between different tractors,but easily 'modifyed'.

Wheatfarmer · Jul 12, 2015

I have a F-11 loader on a Farmall 400. Do you want me to get some measurement for you. Not for sale at this time.

jimkurk · Jul 12, 2015

how can you tell which had the premium strength steel, I have seen different models such as C and B models, thanks for all the input

DeltaRed · Jul 12, 2015

The later ones.There was a decal that said P....S...S....Up on the side.

Lazy WP · Jul 12, 2015

I will sell you a mid series. It isn't the black stripe, but it isn't the 2 tone either.

farmhand F11 F-11 loader questions

jimkurk

New User

DeltaRed

Well-known Member

Wheatfarmer

Member

jimkurk

New User

DeltaRed

Well-known Member

Lazy WP

Well-known Member

Similar threads