Eric in IL
Well-known Member
$134.00 for that part at my friendly Kubota dealership.
It is a pivot pin for an idler pulley arm. Welded the worn spot, roughed it down with angle grinder, finished it with a flat mill file and some emery. Took about 40 minutes of my time today.
I will pay 3 bucks a pop for two new bushings that go in the arm though.
It is a pivot pin for an idler pulley arm. Welded the worn spot, roughed it down with angle grinder, finished it with a flat mill file and some emery. Took about 40 minutes of my time today.
I will pay 3 bucks a pop for two new bushings that go in the arm though.