Oliver plow 360?

shunkfarm · Apr 28, 2015

I picked this up on Craigslist a few days ago. Fellow had disassembled it to remove it from a fence row. From searching the internet I believe it is a 360 model. It needs a few things but id basically a sound unit. It was a pain to reassemble!

Iit is 3-14". There is a bracket and linkage on the left side of the 3 point mount. The linkage goes to a tab that is broken off and has been welded on numerous times by an amateur. I need to make a new tab for the plow side and cannot find a picture of what it looked like originally.

Does anybody know what this piece does? It lets the lower bar pivot but why? I assume it has something to do with leveling the plow but am not sure of the reasoning behind it.
Jay

J. Schwiebert · Apr 28, 2015

360 Series plow! We sold a lot of them in 1963. I think you are talking about the J-bolt as it was called. I would get a parts book/operators manual from the museum in Charles city.

shunkfarm · Apr 29, 2015

(quoted from post at 22:13:02 04/28/15) 360 Series plow! We sold a lot of them in 1963. I think you are talking about the J-bolt as it was called. I would get a parts book/operators manual from the museum in Charles city.

Thanks Mr. S. I forget that they are available from them.

What dealer did you work for if you dont mind?
J

J. Schwiebert · Apr 30, 2015

Napoleon Ohio

shunkfarm · May 1, 2015

My 77 was bought at Mieneke's. Anything above maintenance done to it was done there.

I live in Shunk.
J

Oliver plow 360?

shunkfarm

Member

J. Schwiebert

Well-known Member

shunkfarm

Member

J. Schwiebert

Well-known Member

shunkfarm

Member

Similar threads