Farmall 300/information

jm. · Jul 20, 2014

Got to be someone here that knows this answer. I have a Mississippi Road Machinery grader that we want to restore. It is basically a M farmall with grader attached. Engine is froze up. I have found a good running farmall 300 . I am thinking the 300 replaced the H and the 400 replaced the M but my question is will the 300 split at the clutch housing bolt to the back half of an m. This old grader has welded ring and pinion and heavy weights. Would like to just split at the clutch housing and use the front of the 300. I know it may be less power but think it would drive the thing to shows. Anybody that knows give me an answer thanks in advance. Guy only wants 800 for the 300 .

charlieu · Jul 20, 2014

The H & 300 is of the small frame size 18 inches wide and the M & 400 is Large frame 20 inches wide.

DeltaRed · Jul 20, 2014

No. They will not interchange.

jm. · Jul 20, 2014

Thanks to both of you I was almost certain that was the case. Like I said a nice 300 but won,t do me any good. Thanks again.

Farmall 300/information

jm.

Well-known Member

charlieu

Member

DeltaRed

Well-known Member

jm.

Well-known Member

Similar threads