Farmall C Hydaulics

Anonymous-0 · Jun 1, 2014

Can you tap into the existing Hyd system to run hyd cylinders. I am thinking of adding a aftermarket 3 point hitch that has it's own cylinders. Does the pump have enough power ?

D beatty · Jun 1, 2014

It should work. I have a Farmall B with live hydraulics on it and have had a loader on it since the early 60's.

D beatty · Jun 1, 2014

Here a differant photo. This loader has moved a lot of manure and snow along with some dirt.

504 · Jun 1, 2014

I have the factory FH and IH loader on it. It has a push pull valve to shut off which ever end your are not using.

ih_bug · Jun 2, 2014

yes lots of pressure and the 3 pt really makes a tractor out of a c.
you need the bypass plate they used to be on ebay all the time but cant seem to find one right now.

Geo-TH,In · Jun 2, 2014

I have an IH C. The piston in the lift box isn't very large in diameter. We once had an IH H with a front loader, used tractor hyd pump. It was very slow.

I think some of the add on 3 pt used the lift box and ran a pipe to the 3 pt, not 100% on that.

Let me know how it works, cost, may want to do that to mine.

Anonymous-0 · Jun 2, 2014

I have not bought the C yet. I was looking for alternatives to the Tony Carbrough hitch that lifts with rods running back from the mid tractor rock shaft.

Farmall C Hydaulics

Anonymous-0

Well-known Member

D beatty

Well-known Member

D beatty

Well-known Member

504

Well-known Member

ih_bug

Member

Geo-TH,In

Well-known Member

Anonymous-0

Well-known Member

Similar threads