Loader Q

IH706operator · May 13, 2014

Looking at buying a 595 Allied loader but it has mounts for a White tractor. I located a set of mounts that the guy says came off a 656, would these work?

I looked on Farm-King's website and the part numbers for their mounts are different for the 656 vs the 706 but I wanted to ask and see how different they really are and if I could make them work with little to no adjustment.

Allan in NE · May 14, 2014

I'll bet you can make 'em work one way or another. Those Allied loaders are a good outfit.

Allan

mkirsch · May 14, 2014

You should be OK on the front mounts. I know we transferred the loader mounts for the IH 2350 from the 560 to the 756, and the fronts bolted right up in the exact same spot.

656 has the similar/same front bolster arrangement as a 560.
706 has the similar/same front bolster arrangement as a 756.

Depends on what holes the rear mounts use, how much modification you will need to perform. One thing is for sure you are a lot closer with the 656 mounts than mounts from a White.

Loader Q

IH706operator

New User

Allan in NE

Well-known Member

mkirsch

Well-known Member

Similar threads